As stated, my coilovers are for sale. Less than 4k miles on them, I will include the ECS HD front strut mounts but they are noisy, (known issue with these strut mounts). The mounts are 100% functional and ok to run but the noise drove me crazy, I'd suggest new top mounts and bearings. Only thing...
Possibly selling my R32 front brake setup. Calipers are in great shape, I just rebuilt and painted them last year, rotors are in good shape (just blanks) with 3 track days and 100 street miles on them, 2 sets of pads with more than 80% life left (Hawk DTC-60 and Hawk HP+), also including braided...
Anyone hear of this company before? They offer complete custom bolt on big brake kits for both the front and rear. I'm running into issues finding a BBK that works with my TTRS spindles and would prefer to do a full (front and rear) brake upgrade. Pricing isn't terrible for what you get, specd...
For those of us that went deep down the Rabbit hole there's been a constant issue on the tie Rod ends. The TTRS arms don't thread far enough into the OEM rack and the OEM tie rods are too short. Buddy of mine found this, would allow the use of OEM rack and tie rod ends while maintaining proper...
Despite forums dieing off its good to see there's still some action in here. On top of that, seems like most of the members still here are in the process of some epic builds right now. Just wanted to tip my hat to everyone still not only active here but taking their cars to some incredible...
So as most of you know I'm getting the last of my parts together to build my motor this winter in preparation for the big turbo setup. I currently have a set of Supertech intake and exhaust valves but need to pick up a spring set still (could have swore I bought those already). There's not a...
Anyone here have HPA drill and tap the meth bungs on their manifold. For some reason I seem to remember people having clearance issues with the nozzles. Can anyone confirm there is or is not an issue with there bung placement? Getting my parts list together for my BT setup and thinking about...
My K03 is on its last legs, only peaks to about 16psi, iconic dentist drill sound and smokes like a bitch. I have a K04 in my garage ready to go on. Any issues with running the K04 on a stage 2+ file? I have injectors, FRV, MAP sensor ready to go on when i get the K04 tune as well but will not...
So we bought my daughter a go kart for Christmas 2 years ago. Slowly over time we tossed the idea of building a legit gokart track in our back yard. So, we did! It's a major work in progress and has gone through several iterations until we found a route/course we liked. Ended up with a Daytona...
Changed some thing around on the daily so I have some spare PCV/Catch can parts lying around.
All prices include shipping to lower 48.
OEM PCV W/4K miles - $70
Forge Africa plate - $120
Newsouth multi tap - $20 ***SOLD***
VTA catch can with AN fittings and some hose - $80
Have a set (of 4) barely used Pilot Super sports. Have a little over 300 miles on them and 2 sessions (40minutes total) on the track. Still in great shape but I now run 265 tires and these are too small for me. Looking for $550 + shipping or $500 local pickup.
Had to switch up my rear setup to correct the geometry of the widebody setup. Unfortunately these bushings/bearings will not work in the Megan arms I am now running. Arms show a little where from being old but are in great shape, the spherical bearings have been routinely lubed and come with...
Used for roughly 3k street miles, pads have 70% life left. We're a little too aggressive paired with the Porsche boxter front setup I'm running. Just switched to a softer/street friendly pad and don't need these anymore. $55 shipped to the lower 48.