abe2003
Int Sales Melbournevw.com
- Location
- Melbourne FL
!!!!!actually installed Godspeed intercooler pics inside!!!!!
Here is where I ordered the GODSPEED Intercooler from http://cgi.ebay.com/ebaymotors/06-v...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
Ok guys here you go, it took me about 3 hours to do the install by myself i defiantly recommend that you have a buddy to help out or just have somebody that knows what they are doing install it for you. The whole install went very smoothly. first I spread out everything and examined it carefully, I was glad that i did because I discovered that each clamp went somewhere specific size wise. cutting the hoses was probably the most stressfull part but with a permant marker and a good razor blade you trim the hoses down. Take your time to do this part I can see where trimming the hoses can get ugly very quickly for somebody that doesn't know what they are doing. If you get the core centered properly you don't have to dremmel or cut any part of the bumper everything just poped right back on.
before I forget you will need 4 of screws with washers they don't come with the kit see pic #15
I'll get the specs on the screws tomorrow they look exactly like this
reminds me of what my car looked like before i lowered it
hoses require trimming but not hard to do at all I don't know what happened to the other guy I guess nobody told him, "measure twice cut once"
Here is where I ordered the GODSPEED Intercooler from http://cgi.ebay.com/ebaymotors/06-v...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
Ok guys here you go, it took me about 3 hours to do the install by myself i defiantly recommend that you have a buddy to help out or just have somebody that knows what they are doing install it for you. The whole install went very smoothly. first I spread out everything and examined it carefully, I was glad that i did because I discovered that each clamp went somewhere specific size wise. cutting the hoses was probably the most stressfull part but with a permant marker and a good razor blade you trim the hoses down. Take your time to do this part I can see where trimming the hoses can get ugly very quickly for somebody that doesn't know what they are doing. If you get the core centered properly you don't have to dremmel or cut any part of the bumper everything just poped right back on.
before I forget you will need 4 of screws with washers they don't come with the kit see pic #15
I'll get the specs on the screws tomorrow they look exactly like this
reminds me of what my car looked like before i lowered it
hoses require trimming but not hard to do at all I don't know what happened to the other guy I guess nobody told him, "measure twice cut once"
Last edited:
