Replacement glove box

[pigwet]

I'd like to replace our scratched glove box in our 2017 GTI. Anyone know where I can find this part?

 

[Jarbear]

https://parts.vw.com/a/Volkswagen_2017_GTI-MT/_51505_6700421/GLOVE-BOX/9282365.html

 

[-Dutch-]

Part numbers here, shop around.

https://parts.vw.com/a/Volkswagen_2017_Golf-R-Base-AT/_51505_6700420/GLOVE-BOX/9273505.html

 

[The Fed]

Keep track of the rubber bumpers on the back of your existing door if you replace the door. Couldn't find them available.

 

[chiefhiawatha]

Keep track of the rubber bumpers on the back of your existing door if you replace the door. Couldn't find them available.

They’re available anytime you take a gti for a test drive

 

[Joshyboy]

How the heck do you get the glove box removed, I got everything removed I can and it’s still in there

 

[shovelhd]

How the heck do you get the glove box removed, I got everything removed I can and it’s still in there

Search for the cabin air filter replacement instructions.

 

[IWMTom]

Search for the cabin air filter replacement instructions.

Glovebox doesn't get removed to replace pollen filter.

 

[Jdsunrise]

Glovebox doesn't get removed to replace pollen filter.

Thanks, I can get the door down, I’m speaking of full disassembly, I want to replace it

 

[IWMTom]

Thanks, I can get the door down, I’m speaking of full disassembly, I want to replace it

I know. I replied to someone other than you..

 

[nosmirk]

There are 8 or 9 screws, I forget exactly.

3 above the cd player w/ the glove box open.

1 or 2 behind the cd player (long screwdriver needed)

3 at the bottom of the closed glove box

1 on the right side behind the ear shaped trim panel

1 above the USB port (in the diagram above, it's the circle that the arrow for #2 is pointing at), you'll need to remove the cubby assembly, remove the a/c controls coverplate and remove the arrow shaped trim that's between the pax seat and shifter.
unplug the vent hose, couple of electrical harnesses (lights, etc) and slide the whole assembly out.

i think that's it.

 

[Dr.Ed]

My Mib2.5 would not release from it's slot. So followed the instructions to remove glovebox. The screw behind the mib was not accessible, so broken that plastic part.