06 black magic gti
Ready to race!
- Location
- Columbus, Ohio
- Car(s)
- 2006 BMP GTI
ok i know this isnt actuall stiching but it looks pretty good i think.
supplys needed: thick embrordery thread, sewing needle, tooth pick, scissors, paper plate and super glue.
for the center piece i took the super glue and squeezed it on the plate and used my toothpic to tab a tiny bit in the grove then slowly added the thread and puched it into the grove. i did this all the way around adding a tiny bit of glue ever few millimeters. pics 1,2,3,4
for the steering wheel groves i first made a tiny loop pic 5. then i cut off 10 or so inches for room to play with.
on the opposite end of the loop thread the needle anduse the needle the go under the factore black stiches. then i did the same concept as above. taking my toothpick and adding some super glue in the groves.
after you make ur way all around take the needle end and go through the loop that u made and pull on it to make it tight. then run the needle back under the factore threads and clip the excess.
i made sure all my loops were on the back side and as small as possible
supplys needed: thick embrordery thread, sewing needle, tooth pick, scissors, paper plate and super glue.
for the center piece i took the super glue and squeezed it on the plate and used my toothpic to tab a tiny bit in the grove then slowly added the thread and puched it into the grove. i did this all the way around adding a tiny bit of glue ever few millimeters. pics 1,2,3,4
for the steering wheel groves i first made a tiny loop pic 5. then i cut off 10 or so inches for room to play with.
on the opposite end of the loop thread the needle anduse the needle the go under the factore black stiches. then i did the same concept as above. taking my toothpick and adding some super glue in the groves.
after you make ur way all around take the needle end and go through the loop that u made and pull on it to make it tight. then run the needle back under the factore threads and clip the excess.
i made sure all my loops were on the back side and as small as possible
Attachments
Last edited: